Jiaxing Haina Fastener Co.,Limited
Quality reputation and branding
Add to Cart
Wedge Concrete SS304 / SS316 NO Finish For Metal Construction Anchor Bolt
1.Product Description
Wedge anchor, concrete cavity depth and no higher cleanliness requirements, easy to install and inexpensive. Jacking by selecting the appropriate thickness of the buried depth, with the increase of buried depth, tension increased after the products are reliable and expandable functionality. Body material: stainless steel, carbon steel and other metal materials. it is versatile concrete anchor due to ITS wide let EOF diameters, lengths, and material types.
Installation
Drill hole in base material to your specified embedment depth. Debris from drilling must not interfere with the required embedment depth, the hole that you drill needs to be cleaned out with compressed air. Alternatively if the concrete thickness allows you can drill hole deep enough to accommodate the required embedment depth and the dust/debris from drilling. Assemble anchor so the nut is flush with the top of the anchor, place anchor into position through fixture and drive into the hole until the nut and washer are tight against the fixture.
2.Specification
| Material | Steel | Stainless | Specification |
| Stud | SS304 | 303, 304, 316 | ASTM |
| Clip | SS304 | 304 316 | Federal |
| Washer | SS304 | TYPE 18-8 316 | Plating |
| Nut | SS304 | 304, 316 | Galvanized |
| Anchor Size | Hole Size | Min. Embedment | Std. Thread Length |
| 1/4” all sizes | 1/4” | 1-1/8” | 3/4” |
| 3/8” x 2-1/4” | 3/8” | 1-1/2” | 7/8” |
| 3/8” | 3/8” | 1-1/2” | 1-1/8” |
| 5/8” all sizes | 5/8” | 2-3/4” | 2” |
| 3/4” all sizes | 3/4” | 3-1/4” | 2” |
| 1” | 1” | 4-1/2” | 2-1/4” |
3.Application
Suitable for concrete and dense natural stone, metal constructions, metal profiles, base plate, a support plate, brackets, railings, windows, walls, machines, girders, beams, brackets, and so on.Wedge anchor extends into the tube sheet bore tube ends rolling leaving the tube wall expansion, plastic deformation, the diameter increases, the tube head completely fit the wall of the hole in the tube plate, tube sheet and forcing the elastic deformation . When the expander is removed, the elastic deformation of the tube plate desire restitution, and plastic deformation of the pipe end can not be recovered, the result is the tube plate and hugged the tube end, so as to achieve both the seal does not leak and are firmly connected purposes .
Wedge anchor use, you need to use the impact drill hammers on the fixed body corresponding to the size of the hole, then bolt, expanding loading hole, tighten the nut to the bolt, the expander, between the member and the fixed mounting swelling become one
4.Advantages
1. Good after sales service. Any small problem happening will be solved at the most prompt time;
2. Many years of export experience;
3. Specifications list is available upon your request
4. Welcome to send enquiry, we will reply soon.
5. Can provide MTC
5.More pictures
